3798-S sc: digital inductive conductivity sensor. Immersion probe with integrated A/D electronics for use with an SC controller.
| Weight | < 1 kg |
| Flow | < 4 m/s |
| Interface | Modbus |
| Maintenance interval | 2 years or 1000 hours after seal replacement |
| Pressure range | Max. 20 m immersion depth |
| Diameter | 43 mm |
| Immersion depth | 20 m/2 bar |
| Accuracy | ± 1% of actual value or ± 0.004 mS/cm, whichever is greater |
| Warranty | 24 aylar |
| Cell constant | 2.35 cm -1 |
| Operating temperature range | -20 - 50 °C |
| Cable Length | 10 m fixed cable, Polyurethane |
| Calibration method | Zero calibration in air. 1-point calibration with defined resistance or standard solution |
| What's in the box | Includes: sensor with cable and manual |
| Malzeme | Stainless steel metal housing, PEEK, Polyurethane, PPS |
| Enclosure Rating | IP68 |
| Measuring range | 250 µS/cm - 2500 mS/cm |
| Storage conditions | -20°C - 60°C; 95% relative humidity (non-condensing) |
| Sensor thread | 1 inch NPT male thread |
| Certifications | CE (including RoHS) |
| Temperature accuracy | ± 0.2°C |
| Temperature compensation | Automatic or manual Automatic or manual |
| Repeatability | < %0.2 |
| Response time | < 2 s |
| Length | 370 mm |
Documents open on the Hach website in a new tab.
Immersion probe with integrated A/D electronics for use with an SC controller.
Product code: LXV428.99.00001
IN THE SAME CATEGORY
These enhanced-performance sensors are manufactured to tight tolerances using high-quality, durable materials for demanding applications including ultrapure water, clean-in-place (CIP) and boiler/condensate monitoring.
These enhanced-performance sensors are manufactured to tight tolerances using high-quality, durable materials for demanding applications including ultrapure water, clean-in-place (CIP) and boiler/condensate monitoring.
Electrodeless Conductivity Sensor - Wide measuring range - Low-maintenance design - Versatile mounting - Operating principle - Resistant to harsh environments
Hach Inductive Conductivity Sensors can measure from 200 to 2, 000, 000 microSiemens/cm. The built-in Pt 1000 RTD compensates the measured conductivity for changes in process temperature.
