9187sc Chlorine Dioxide Analyser
The 9187 sc Chlorine Dioxide (ClO 2 ) Sensor is an online, single-channel industrial sensor that measures ClO 2 in drinking water treatment plants, distribution networks and other applications requiring ClO 2 monitoring at ppb and ppm levels…
| Weight | 6.5 kg |
| Flow | Automatic regulation 14 L/h (200 - 250 mL/min) with flow cell |
| Relative humidity | 0 - 90% non-condensing |
| Maintenance interval | 6 months for diaphragm and electrolyte in typical operation (range: 3 to 12 months) |
| Pressure range | 0.1 - 2 bar in flow cell |
| Accuracy | 5% or ±10 ppb ClO 2 , whichever is greater |
| Warranty | 24 aylar |
| Width | 250 mm |
| Interferences | -- |
| Operating temperature range | 0 - 45 °C |
| Calibration interval | 2 months |
| Calibration method | Zero Calibration: Electrically or with ozone-free water. Calibration: Comparison of lab method with process sample |
| Mounting | Flat, vertical surface (panel, stand, etc.) |
| Enclosure Rating | IP66 / NEMA 4X |
| Sample outlet | 0.5 " ID |
| Sample inlet | 0.25 " OD |
| Sample temperature | 2 - 45 °C |
| Measuring range | 0 - 2 mg/L ClO 2 |
| Measuring principle | Amperometric/Membrane (electrode, membrane, electrolyte) |
| Measurement frequency | Continuous |
| Parameter | Chlorine dioxide |
| Storage conditions | -20 - 60 °C |
| Detection limit | 0.01 mg/L ClO 2 |
| Temperature compensation | Automatic over sample temperature range Automatic over sample temperature range |
| Standard deviation | 1.5 % |
| Response time | 90% in less than 90 seconds |
| Height | 270 mm |
| Part No. | Description | Parameter |
|---|---|---|
| LXV434.99.00001 | 9187sc Amperometric klor dioksit Analyser | Chlorine dioxide |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
- User Manual: Chlorine Analyser 9184sc, Ozone Analyser 9185sc, Chlorine Dioxide Analyser 9187sc
- Tender Text Chlorine Dioxide Amperometric Sensor
- Complete Water Analysis for Chemical and Refining industry
- Tender Text Chlorine Dioxide Amperometric Sensor
Documents open on the Hach website in a new tab.
The 9187 sc Chlorine Dioxide (ClO2) Sensor is an online, single-channel industrial sensor that measures ClO2 in drinking water treatment plants, distribution networks and other applications requiring ClO2 monitoring at ppb and ppm levels.
The all-inclusive 9187 sc chlorine dioxide system comes pre-assembled on a panel. To get started, simply mount the panel in the desired location, install the sensors and connect the controller. The sensor's membrane system means no reagents are used for measurement. Maintenance requirements are minimal, and typical maintenance items for two years are supplied with the system.
Product code: LXV434.99.00001