Hach
NA5600sc Sodium Analyser
Ensure uptime with accurate, low-level sodium measurements and predictive diagnostics.
| Flow Rate | 100 - 150 mL/min (6 - 9 L/h) |
| Analog outputs | 6 isolated, 0 - 20 mA or 4 - 20 mA; load impedance: 600 Ohm maximum. Connection: 0.644 - 1.29 mm² (24 - 16 AWG) wire; 0.644 - 0.812 mm² (24 - 20 AWG) twisted-pair shielded cable recommended |
| Relative humidity | 10 - 80%, non-condensing |
| Maintenance interval | Every 90 days: refill of electrolytes, reagents and calibration solution |
| Display | Colour 5.7'' LCD |
| Electrode type | Sodium ISE (ion-selective electrode) and reference electrode with KCl electrolyte |
| Power requirements (Voltage) | 100 - 240 V AC |
| Input | Sample line and sample bypass drain: 6 mm O.D. push-in fitting for plastic tubing. Chemical and case drain: 7/16 inch I.D. slip fitting for soft plastic tubing |
| Interference | < 0.1 ppb |
| Calibration method | Automatic, and Manual with standard addition technique: 1 or 2 points |
| Pollution degree | 2 |
| Malzeme | Polyol case, PC door, PC hinges and latches, 304/316 SST hardware |
| Sample pressure | 0.2 - 6 bar |
| Max. suspended solids concentration in sample | < 2 NTU, without oil and grease. Install an approx. 100 µm filter for boiler sample type |
| Sample temperature | 5 - 45°C |
| Ambient temperature | 5 - 50°C |
| Parameter | Sodium |
| Relay output | 6; type: unpowered SPDT relays, each rated 5 A resistive, 240 VAC maximum. Connection: 1.0 - 1.29 mm² (18 - 16 AWG) wire; 1.0 mm² (18 AWG) stranded wire recommended, 5 - 8 mm O.D. cable |
| Number of relays | 6 |
| Storage conditions | -20 - 60°C |
| Detection limit | 0.01 ppb |
| Fuse | Input power: T 1.6 A, 250 VAC; Relays: T 5.0 A, 250 V |
| Repeatability | 0.02 ppb or 1.5% of reading (whichever is greater) within a change of < ±10°C |
| Response time | 0.1 ppb - 10 ppb: ≤ 3 minutes, T95 ≤ 4 minutes; < 1 ppb - 100 ppb: T90 < 2 minutes, T95 < 3 minutes (approx. 150 seconds) |
| Total number of analog outputs | 6 |
| Load | 600 Ohm |
| Part No. | Description | Measuring range | Mounting | Number of channels | Options | Reagents included |
|---|---|---|---|---|---|---|
| LXV526.98.1011A | NA5600sc Online Sodium Analyser, 1 channel, wall mount | 0,01 ppb - 10.000 ppb | Duvara montaj | 1 | Analyser only | No |
| LXV526.98.1012A | NA5600sc Online Sodium Analyser, 2 channels, wall mount | 0,01 ppb - 10.000 ppb | Duvara montaj | 2 | Analyser only | No |
| LXV526.98.1014A | NA5600sc Online Sodium Analyser, 4 channels, wall mount | 0,01 ppb - 10.000 ppb | Duvara montaj | 4 | Analyser only | No |
| LXV526.98.2011A | NA5600sc Online Sodium Analyser, 1 channel, panel mount | 0,01 ppb - 10.000 ppb | Panoya monte | 1 | Analyser only | No |
| LXV526.98.2012A | NA5600sc Online Sodium Analyser, 2 channels, panel mount | 0,01 ppb - 10.000 ppb | Panoya monte | 2 | Analyser only | No |
| LXV526.98.2014A | NA5600sc Online Sodium Analyser, 4 channels, panel mount | 0,01 ppb - 10.000 ppb | Panoya monte | 4 | Analyser only | No |
| LXV526.98.1111A | NA5600sc Online Sodium Analyser, 1 channel, Automatic Calibration, wall mount | 0,01 ppb - 10.000 ppb | Duvara montaj | 1 | Analyser, Automatic Calibration | No |
| LXV526.98.1112A | NA5600sc Online Sodium Analyser, 2 channels, with Automatic Calibration, wall mount | 0,01 ppb - 10.000 ppb | Duvara montaj | 2 | Analyser, Automatic Calibration | No |
| LXV526.98.1114A | NA5600sc Online Sodium Analyser, 4 channels, with Automatic Calibration, wall mount | 0,01 ppb - 10.000 ppb | Duvara montaj | 4 | Analyser, Automatic Calibration | No |
| LXV526.98.2111A | NA5600sc Online Sodium Analyser, 1 channel, Automatic Calibration, panel mount | 0,01 ppb - 10.000 ppb | Panoya monte | 1 | Analyser, Automatic Calibration | No |
| LXV526.98.2112A | NA5600sc Online Sodium Analyser, 2 channels, with Automatic Calibration, panel mount | 0,01 ppb - 10.000 ppb | Panoya monte | 2 | Analyser, Automatic Calibration | No |
| LXV526.98.2114A | NA5600sc Online Sodium Analyser, 4 channels, with Automatic Calibration, panel mount | 0,01 ppb - 10.000 ppb | Panoya monte | 4 | Analyser, Automatic Calibration | No |
| LXV526.98.1211A | NA5600sc Online Sodium Analyser, 1 channel, with Cation Kit, wall mount | 0.01 ppb - 200 ppm | Duvara montaj | 1 | Analyser, with Cation Kit | No |
| LXV526.98.1212A | NA5600sc Online Sodium Analyser, 2 channels, with Cation Kit, wall mount | 0.01 ppb - 200 ppm | Duvara montaj | 2 | Analyser, with Cation Kit | No |
| LXV526.98.1214A | NA5600sc Online Sodium Analyser, 4 channels, with Cation Kit, wall mount | 0.01 ppb - 200 ppm | Duvara montaj | 4 | Analyser, with Cation Kit | No |
| LXV526.98.2211A | NA5600sc Online Sodium Analyser, 1 channel, with Cation Kit, panel mount | 0.01 ppb - 200 ppm | Panoya monte | 1 | Analyser, with Cation Kit | No |
| LXV526.98.2212A | NA5600sc Online Sodium Analyser, 2 channels, with Cation Kit, panel mount | 0.01 ppb - 200 ppm | Panoya monte | 2 | Analyser, with Cation Kit | No |
| LXV526.98.2214A | NA5600sc Online Sodium Analyser, 4 channels, with Cation Kit, panel mount | 0.01 ppb - 200 ppm | Panoya monte | 4 | Analyser, with Cation Kit | No |
| LXV526.98.1311A | NA5600sc Online Sodium Analyser, 1 channel, with Cation Kit and Automatic Calibration, wall mount | 0.01 ppb - 200 ppm | Duvara montaj | 1 | Analyser, with Cation Kit and Automatic Calibration | No |
| LXV526.98.1312A | NA5600sc Online Sodium Analyser, 2 channels, with Cation Kit and Automatic Calibration, wall mount | 0.01 ppb - 200 ppm | Duvara montaj | 2 | Analyser, with Cation Kit and Automatic Calibration | No |
| LXV526.98.1314A | NA5600sc Online Sodium Analyser, 4 channels, with Cation Kit and Automatic Calibration, wall mount | 0.01 ppb - 200 ppm | Duvara montaj | 4 | Analyser, with Cation Kit and Automatic Calibration | No |
| LXV526.98.2311A | NA5600sc Online Sodium Analyser, 1 channel, with Cation Kit and Automatic Calibration, panel mount | 0.01 ppb - 200 ppm | Panoya monte | 1 | Analyser, with Cation Kit and Automatic Calibration | No |
| LXV526.98.2312A | NA5600sc Online Sodium Analyser, 2 channels, with Cation Kit and Automatic Calibration, panel mount | 0.01 ppb - 200 ppm | Panoya monte | 2 | Analyser, with Cation Kit and Automatic Calibration | No |
| LXV526.98.2314A | NA5600sc Online Sodium Analyser, 4 channels, with Cation Kit and Automatic Calibration, panel mount | 0.01 ppb - 200 ppm | Panoya monte | 4 | Analyser, with Cation Kit and Automatic Calibration | No |
| 8428000 | Prognosys NA5600sc Licence Kit |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
- NA5600sc Online Sodium Analyser
- Prognosys for the NA5600sc Sodium Analyser: Eliminate last-minute maintenance emergencies
- Solutions for Monitoring Water in Green Hydrogen Production
- NA5600sc Sodium CSI Engineering Specifications
- Tender Text Online Sodium Analyser
- NA5600sc Online Sodium Analyser
- Prognosys for NA5600sc Sodium Analyser: Eliminate last-minute maintenance emergencies
Documents open on the Hach website in a new tab.
Ensure uptime with accurate, low-level sodium measurements and predictive diagnostics.
Trust your steam cycle water with the new Hach NA5600sc Sodium Analyser, featuring proprietary predictive diagnostics, automatic electrode reactivation that prevents downtime, less maintenance with reagent changes every 90 days, and a small footprint.
Optimise Uptime and Response Time with Automatic Electrode Reactivation
The NA5600sc analyser provides automatic electrode reactivation for optimum response time and accuracy. The reactivation process uses non-hazardous chemicals and eliminates the need for manual reactivation or acid etching of the electrode.
Space-Saving Design
A smaller instrument footprint and streamlined layout for easy integration into existing or new plants.
Low Maintenance
Maintenance of the NA5600sc Sodium Analyser requires refilling reagents only every 90 days and replacing reagent tubing and the sodium electrode once a year. Clear step-by-step instructions make maintenance easy.
Prevent Downtime
Hach's proprietary Prognosys technology, with predictive diagnostic tools such as warning LEDs and high-visibility notification screens, helps you prevent unexpected downtime.