Hach
FX6x0 Sample Filtration Systems
The FX610 and FX620 are lightweight sample filtration systems for the NH6000sc and include a sample pump and compressor integrated directly into the analyser.
Ammonium Analysers
Details →
Hach · LXV215
Sigmatax 2 sampling and ultrasonik homojenizasyon Controller
Preparation system for samples containing solids with particle sizes
| Weight | 12 kg control unit 7.5 kg probe with 10 m hose |
| Current output | 1 A 24 V, error signaling contact, floating |
| Interface | Service interface: RS 232 |
| Maintenance requirements | 0.5 h/week |
| Dimensions (H x W x D) | 560 mm x 366 mm x 212 mm |
| Diameter | 184 mm probe |
| Power requirements (Hz) | 50 Hz |
| Power requirements (Voltage) | 230 V AC |
| Power Consumption | 150 VA |
| Warranty | 24 aylar |
| Tubing length | 10 to 30 m (heated) |
| Operating temperature range | 5 - 30 °C (Sample) 5 - 40 °C control unit |
| What's in the box | 1 set of operating instructions,1 maintenance calendar, 1 Factory Test Certificate |
| Enclosure Rating | IP54 |
| Measuring principle | Sample preperation only; Sample pumping controlled by pressure, homogenisation using ultrasound |
| Measurement frequency | 12 to 20 min for up to 2 Phosphax sigma or TOCTAX process photometers |
| Service interval | 3 months |
| Delivery height | 7 m (for hose length 30 m, max 6 m) |
| Length | 404 mm Sonde |
Documents open on the Hach website in a new tab.
Preparation system for samples containing solids with particle sizes <0.5 mm from outfall of a sewage plant. Microprocessor-controlled operation and self-diagnosis. Operation only with suction probe.
Supplies the Phosphax sigma and TOCTAX process photometers with ultrasonically homogenized original samples for the determination of Total Phosphorus and TOC. This enables the representative original samples, including solids, to be measured reliably and accurately.
Product code: LXV215
IN THE SAME CATEGORY
Related products
Hach
FILTRAX (eco) Sample Filtration Systems
Filtrax and Filtrax eco Sample Filtration Systems continuously take samples by passing them through ultrafiltration membranes (0.15 µm) immersed in the process effluent, aeration basin or primary settling tank.
Ammonium Analysers
Details →