All the key parameters you need in a single portable instrument. The Hach SL250 Portable Parallel Analyser (PPA) is an innovative, multi-parameter water quality meter that lets you perform colorimetric and probe-based measurements simultaneously…
| Weight | 1.0 kg |
| Interface | Mini USB port |
| Battery life | >200 Chemkey tests with a fully charged battery |
| Boyutlar | 13.08 x 5.89 x 25.83 cm (5.15 x 2.32 x 10.17 in.) |
| Output Voltage | 12 V with 3A output |
| Instrument | Portable |
| Detector | Silicon photodiode |
| Power requirements (Hz) | 50/60 Hz |
| Power requirements (Voltage) | 100 - 240 V AC |
| Warranty | 24 aylar |
| Power supply | 2.5 mm Jak |
| Operating temperature range | 5 - 50°C, maximum 85% relative humidity (non-condensing) |
| Number of channels | 1 |
| Lock Function | For Intellical probes: Press to Read and Continuous measurement mode |
| Connector | 5-Pin Input Connector: two M12 connectors for Intellical probes |
| Protection class | III |
| What's in the box | SL250 PPA, with carrying case, 250 V power cables and manual |
| Enclosure Rating | IP54 |
| Measurement display lock | For Intellical probes: Off, automatic and manual (depending on parameter) |
| Measurement mode | Transmittance (%), Absorbance (abs) and Concentration (Conc) |
| Sensor | Intellical pH: PHC10101, PHC10103, PHC20101, PHC20103, PHC28101, PHC28103, PHC30101, PHC30103, PHC73501, PHC70501, PHC72501, PHC74501, PHC705A01, PHC72901, PHC80501 Intellical ORP: MTC10101, MTC30101, MTC10103, MTC30103 Intellical LDO: LDO10101, LDO10103 Intellical Conductivity: CDC40101, CDC40103 Intellical ISE Chloride: ISECL18101, ISECL18103 Intellical ISE Fluoride: ISEF12101, ISEF12103 Intellical ISE Ammonium: ISENH418101, ISENH418103 Intellical ISE Sodium: ISENA38101, ISENA38103 Intellical ISE Nitrate: ISENO318101, ISENO318103 |
| Certifications | CE, UKCA, FCC, ISED, RCM, KC |
| Temperature | Charging Temperature: 5 - 45°C, maximum 85% relative humidity (non-condensing) Storage Temperature: -20 - 60°C, maximum 85% relative humidity (non-condensing) |
| Temperature input | 5 - 45°C, maximum 85% relative humidity (non-condensing) |
| Data storage | Memory: 1000 measured values (result, date, time, site ID, user ID) |
| Data Storage | Automatic in Press to Read measurement mode. Manual in Continuous measurement mode |
Documents open on the Hach website in a new tab.
The Hach SL250 Portable Parallel Analyser (PPA) is an innovative, multi-parameter water quality meter that lets you perform colorimetric and probe-based measurements simultaneously. The instrument and its Chemkey reagents are easy to use and require no technical expertise. Compared with traditional powder or liquid reagent methods, Chemkeys use a simplified test method that requires no sample preparation, significantly reducing variability in results and making the process considerably easier, faster and safer.
Colorimetric tests include free chlorine, total chlorine, fluoride, high range manganese, zinc, copper, nitrite, dissolved iron, high and low alkalinity, high and low range orthophosphate, high and low range hardness, peracetic acid and other tests.
Probe-based tests include pH, dissolved oxygen, conductivity and other tests.
*Not suitable for chloramination applications*
Product code: LPV443.99.11002
IN THE SAME CATEGORY
The new Hach SL1000 Portable Parallel Analyser (PPA) performs the same test in less than half the steps of manual processes. Get precise results in a very short time with very little chance of error.
