The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
| Ağırlık | Max. 35 kg |
| Akış Hızı | 100 - 300 mL/min |
| Analog çıkışlar | Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8 |
| Boyut (Y x G x D) | 740 mm x 500 mm x 340 mm |
| Çıkış | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| Cihaz havası | Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar |
| Demineralize su | Internal dilution option: Rinse water & Dilution water |
| Dijital çıkışlar | Profibus DP or Modbus RTU |
| Doğrulama | Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Doğruluk | Better than 2% full scale range for standard test solutions |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Enerji | 100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA |
| Garanti | 24 aylar |
| Girişimler | Tannin, large amounts of iron, sulfide (S²ˉ) and phosphate (PO₄³ˉ) interfere. Large quantities of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere. |
| Kalibrasyon | Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced |
| Koruma sınıfı | IP44 |
| Kutudakiler | EZ1035sc Silica Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and 3 x empty 2.5L Reagent Containers with Fittings (for Colour, Oxalic Acid, Reducing) |
| Malzeme | Hinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated |
| Numune akışı sayısı | Standard: 1 Optional accessory for 2, 4, or 8 sample streams |
| Numune basıncı | By external overflow vessel (open to atmospheric pressure) |
| Numune kalitesi | Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU |
| Numune sıcaklığı | 10 - 30 °C |
| Ölçüm aralığı | No Dilution 0.005 - 0.25 mg/L SiO₂ 0.005 - 0.5 mg/L SiO₂ 0.01 - 1 mg/L SiO₂ Internal Dilution 0.05 - 5 mg/L SiO₂ 0.1 - 10mg/L SiO₂ 0.25 - 25 mg/L SiO₂ 0.5 - 50 mg/L SiO₂ 0.75 - 75 mg/L SiO₂ 1 - 100 mg/L SiO₂ |
| Ölçüm metodu | Colorimetric Molybdate colorimetric method |
| Ölçüm süresi | No Dilution Default: 10 min. Continuous: 10 min. Internal Diluation Default: 15 min. Continuous: 13 min. |
| Ortam sıcaklığı | 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing) |
| Otomatik temizleme | Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Parametre | Silica |
| Reaktif gereksinimi | Keep between 10 - 30 °C |
| Röleler | 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150) |
| Saptama limiti | No Dilution 0.005 - 0.25 mg/L SiO₂: 0.005 mg/L 0.005 - 0.5 mg/L SiO₂: 0.005 mg/L 0.01 - 1 mg/L SiO₂: 0.01 mg/L Internal Dilution 0.05 - 5 mg/L SiO₂: 0.05 mg/L 0.1 - 10mg/L SiO₂: 0.1 mg/L 0.25 - 25 mg/L SiO₂: 0.25 mg/L 0.5 - 50 mg/L SiO₂: 0.5 mg/L 0.75 - 75 mg/L SiO₂: 0.75 mg/L 1 - 100 mg/L SiO₂: 1 mg/L |
| Sertifikalar | CE, ETL certified to UL and CSA safety standards, UKCA |
| Toprak bağlantısı | Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Parça No | Tanım | Ürün açıklaması | Parametre | Ölçüm aralığı | Çıkış |
|---|---|---|---|---|---|
| EZ1035.9800140T | EZ1035sc Silica Colorimetric Analyser, 1 stream, 4x mA Output | EZ1035sc Silica Colorimetric Analyser, 1 stream, 4x mA Output | Silica | No Dilution 0.005 - 0.25 mg/L SiO₂ 0.005 - 0.5 mg/L SiO₂ 0.01 - 1 mg/L SiO₂ Internal Dilution 0.05 - 5 mg/L SiO₂ 0.1 - 10mg/L SiO₂ 0.25 - 25 mg/L SiO₂ 0.5 - 50 mg/L SiO₂ 0.75 - 75 mg/L SiO₂ 1 - 100 mg/L SiO₂ | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
Fiyat ve teslim süresi için teklif isteyin; ilgilendiğiniz parça numarasını mesajınızda belirtebilirsiniz.
Dokümanlar Hach sitesinde yeni sekmede açılır.
The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water.
The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
- EZ1035sc, standard measuring range: 0 - 1 mg/L Si
Options:
- Calibration to 25% or 50% of standard range
- Internal dilution
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication
Some applications may require the use of a sampling/filtration or a external dilution system for sample preconditioning. For this option please check the EZ Series Sample Preconditioning page.
Need support or a different configuration for your online Silica analyser? Please contact us.
Ürün kodu: EZ1035.9800140T
AYNI KATEGORİDE
Daha Az Bakım, Daha Az Arıza Süresi. Analizörün 90 güne kadar refakatsiz çalışması için yalnızca iki litre reaktif gereklidir; bu zaman, 5000 Serisi için geçerli olan sürenin iki katıdır.
Daha Az Bakım, Daha Az Arıza Süresi. Analizörün 90 güne kadar refakatsiz çalışması için yalnızca iki litre reaktif gereklidir; bu zaman, 5000 Serisi için geçerli olan sürenin iki katıdır.
The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …
For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…
