For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…
| Ağırlık | Max. 35 kg |
| Akış Hızı | 100 - 300 mL/min |
| Analog çıkışlar | Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8 |
| Boyut (Y x G x D) | 688 mm x 460 mm x 340 mm |
| Cihaz havası | Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar |
| Dijital çıkışlar | Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150) Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP RS485 communication: Profibus DP or Modbus RTU |
| Doğrulama | Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Doğruluk | Better than 2% full scale range for standard test solutions |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Enerji | 100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA |
| Garanti | 24 aylar |
| Girişimler | Metal ions like aluminium [(Al)³+] > 72 mg/L, calcium [(Ca)²+] > 108 mg/L and iron [(Fe)²+/(Fe)³+] > 150 mg/L. Fats, oil, proteins, surfactants and tar. |
| Koruma sınıfı | IP44 |
| Malzeme | Hinged part: Thermoform ABS, Door: PMMA Wall section: Galvanised steel, powder coated |
| Numune akışı sayısı | Standard: 1 Optional accessory for 2, 4, or 8 sample streams |
| Numune basıncı | By external overflow vessel (open to atmospheric pressure) |
| Numune kalitesi | Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU |
| Numune sıcaklığı | 10 - 30 °C |
| Ortam sıcaklığı | 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing) |
| Otomatik temizleme | Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Parametre | Fluoride |
| Reaktif gereksinimi | Keep between 10 - 30 °C |
| Sertifikalar | CE, ETL certified to UL and CSA safety standards, UKCA |
| Toprak bağlantısı | Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Parça No | Tanım | Ürün açıklaması | Parametre | Ölçüm aralığı | Çıkış |
|---|---|---|---|---|---|
| EZ3008.9800140T | EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA | EZ3008sc Fluoride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA | Fluoride | 0.05 - 2.5 mg/L Fˉ 0.1 - 5 mg/L Fˉ 0.2 - 10 mg/L Fˉ | |
| EZ3508.9800140T | EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA | EZ3508sc Fluoride Ion-Selective Electrode (ISE) Standard Addition Analyser, 1 stream, 4x mA | Fluoride | No dilution 0.2 - 10 mg/L Fˉ 0.5 - 25 mg/L Fˉ 1 -50 mg/L Fˉ 2 - 100 mg/L Fˉ Internal dilution 10 - 500 mg/L Fˉ 20 - 1000 mg/L Fˉ |
Fiyat ve teslim süresi için teklif isteyin; ilgilendiğiniz parça numarasını mesajınızda belirtebilirsiniz.
Dokümanlar Hach sitesinde yeni sekmede açılır.
For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective Electrode (ISE) technology with low-maintenance operation. Choose the EZ3008sc for stable, predictable water matrices, or the EZ3508sc for variable or complex samples where ionic strength and interferences can shift, supported by automated standard addition to help correct matrix effects.
Which Analyser Should I Choose?
The decision comes down to one factor: your water matrix. The simpler your matrix, the simpler your solution can be.
Choose the Hach EZ3008sc Fluoride Analyser (Direct ISE), measuring 0,1 - 1,000 mg/L F-, for stable, predictable water with consistent chemistry, such as municipal drinking water and fluoridation systems. Because this matrix has minimal interferences, direct ISE measurement delivers accurate, repeatable results with low maintenance and a lower total cost of ownership.
Choose the Hach EZ3508sc Fluoride Analyser (Direct ISE and Standard Addition), measuring 0,1 - 1,000 mg/L F-, for variable or complex water such as industrial process water, wastewater, and surface water, where shifting ionic strength and interfering ions like calcium and aluminium can distort direct readings. Its automated standard addition mode corrects for these interferences to deliver accurate, repeatable results in challenging conditions.
Use the filters in the table below to find your online Fluoride Analyser. Need support or a different configuration? Please contact us.
AYNI KATEGORİDE
The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
The EZ7300 Series Analysers offer online monitoring of microbial activity in water via ATP (adenosine triphosphate). Typical applications are cooling water, steam & power generation, drinking water and process water.
