Hach · EZ7300.XXXXXXXX

EZ Series ATP Analysers

The EZ7300 Series Analysers offer online monitoring of microbial activity in water via ATP (adenosine triphosphate). Typical applications are cooling water, steam & power generation, drinking water and process water.

Ağırlık30 kg
Akış Hızı100 - 300 mL/min
Alarm1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts
Analog çıkışlarActive 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)
Boyut (Y x G x D)690 mm x 465 mm x 330 mm
Cihaz havasıDry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air
Demineralize suFor rinsing
Dijital çıkışlarOptional: Modbus (TCP/IP, RS485)
DoğrulamaAutomatic; frequency freely programmable
DoğrulukBetter than 4% full scale range for standard test solutions
DrenajAtmospheric pressure, vented, min. Ø 32 mm
Enerji100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA
Garanti24 aylar
GirişimlerHigh concentrations of Hg 2+ , Cu 2+ , Zn 2+ , Cd 2+ , Fe 2+ . Total salt concentrations higher than 1 g/L. pH lower than 5.5 and higher than 8.
Güç kaynağı100 - 240 VAC, 50/60 Hz
KalibrasyonAutomatic, 2-point; frequency freely programmable
Koruma sınıfıAnalyser cabinet: IP44 / Panel PC: IP65
KutudakilerEZ7300 ATP Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 2 x empty 5L Reagent Container with Fittings (NaOH & HCl Solution) and 3 x Screwcap/Fittings/Reference1/Reference2
MalzemeHinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated
ModelEZ7300
Numune akışı sayısı1, 2, 4, or 8
Numune basıncıMaximum 3 bar for direct injection or by external overflow vessel via the grab sample pump
Numune sıcaklığı5 - 30 °C
Ölçüm aralığı0.5 - 200 pg/mL
0.5 - 200 pg/mL
Ölçüm metoduDetermination of adenosine triphosphate (ATP) by means of chemiluminescent reaction using luciferin and luciferase, conform with standard method ASTM D4012-81
Ölçüm süresi7 - 10 minutes incl. sample lysis
Ortam sıcaklığı7 - 23 °C ±4 °C deviation at 5 - 95% relative humidity (non-condensing)
ParametreATP
Reaktif gereksinimiKeep between 4 - 8 °C during operation, shielded from light. For prolonged storage, store at -20 °C in a dark environment.
Saptama limiti≤ 0.05 pg/mL (0.1 pM) ATP
SertifikalarCE compliant / UL certified
Toprak bağlantısıDry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Ürün kodu: EZ7300.XXXXXXXX

İlgili ürünler

EZ Series Ammonium Analysers
Hach

EZ Series Ammonium Analysers

The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …

Amonyum Analizörleri Detay →
EZ Series Fluoride Analysers
Hach

EZ Series Fluoride Analysers

For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…

Florür Analizörleri Detay →
EZ Series Phosphate Analysers
Hach

EZ Series Phosphate Analysers

The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.

Fosfat Analizörleri Detay →
EZ Series Silica Analysers
Hach

EZ Series Silica Analysers

The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.

EZ1035.9800140T Detay →