The EZ sc Series Online Analysers offer multiple options to monitor Nickel in water. Typical applications are drinking water, surface water, industrial effluent.
| Weight | Max. 35 kg |
| Flow Rate | 100 - 300 mL/min |
| Analog outputs | Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8 |
| Dimensions (H x W x D) | 688 mm x 460 mm x 340 mm |
| Output | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| Instrument air | Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar |
| Demineralised water | Internal dilution option: Rinse water & Dilution water |
| Digital outputs | Profibus DP or Modbus RTU |
| Verification | Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Warranty | 24 aylar |
| Calibration | Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced |
| Protection class | IP44 |
| Malzeme | Hinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated |
| Number of sample streams | Standard: 1 Optional accessory for 2, 4, or 8 sample streams |
| Sample pressure | By external overflow vessel (open to atmospheric pressure) |
| Sample quality | Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU |
| Sample temperature | 10 - 30 °C |
| Ambient temperature | 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing) |
| Automatic cleaning | Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Reagent requirement | Keep Buffer between 10 - 25 °C, all other between 10 - 30 °C |
| Relays | 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150) |
| Certifications | CE, ETL certified to UL and CSA safety standards, UKCA |
| Earth connection | Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Part No. | Description | Product description | Parameter | Measuring range | Output |
|---|---|---|---|---|---|
| EZ1027.9800140T | EZ1027sc Nickel Colorimetric Analyser, 1 stream, 4x mA Output | EZ1027sc Nickel Colorimetric Analyser, 1 stream, 4x mA Output | Nickel Ni(II), dissolved | No Dilution 0.005 - 0.25 mg/L Ni 0.010 - 0.5 mg/L Ni Internal Dilution 0.050 - 2.5 mg/L Ni 0.100 - 5 mg/L Ni 0.250 - 12.5 mg/L Ni 0.500 - 25 mg/L Ni 0.750 - 37.5 mg/L Ni 1 - 50 mg/L Ni | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| EZ2727.980B140T | EZ2727sc Total Nickel Colorimetric Analyser, 1 stream, 4x mA Output | EZ2727sc Total Nickel Colorimetric Analyser, 1 stream, 4x mA Output | Nickel, total | No Dilution 0.01 - 0.25 mg/L Ni(T) 0.02 - 0.5 mg/L Ni(T) Internal Dilution 0.1 - 2.5 mg/L Ni(T) 0.2 - 5 mg/L Ni(T) 0.5 - 12.5 mg/L Ni(T) | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
Documents open on the Hach website in a new tab.
The EZ sc Series Online Analysers offer multiple options to monitor Nickel in water. Typical applications are drinking water, surface water, industrial effluent.
The EZ1000sc and EZ2000sc Series Analysers use colorimetric analysis to measure dissolved and total Nickel:
- EZ1027sc Nickel Ni(II), dissolved
- EZ2727sc Nickel, total
Options for all analysers include:
- Calibration to 25% or 50% of standard range
- Internal dilution
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication
Some applications may require the use of a sampling/filtration or a external dilution system for sample pre-conditioning. For this option please check the EZ9000 Sample pre-conditioning page.
Use the filters in the table below to find your Nickel analyser. Need support or a different configuration? Please contact us.
IN THE SAME CATEGORY
The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …
For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
