Hach
FX6x0 Sample Filtration Systems
The FX610 and FX620 are lightweight sample filtration systems for the NH6000sc and include a sample pump and compressor integrated directly into the analyser.
Ammonium Analysers
Details →
Hach
EZ Series Phosphate Analysers
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
| Weight | Max. 35 kg |
| Flow Rate | 100 - 300 mL/min |
| Dimensions (H x W x D) | 688 mm x 460 mm x 340 mm |
| Output | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| Instrument air | Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar |
| Demineralised water | Internal dilution option: Rinse water & Dilution water |
| Digital outputs | Profibus DP or Modbus RTU |
| Verification | Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Accuracy | Better than 2% full scale range for standard test solutions |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Warranty | 24 aylar |
| Calibration | Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced |
| Protection class | IP44 |
| Malzeme | Hinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated |
| Number of sample streams | Standard: 1 Optional accessory for 2, 4, or 8 sample streams |
| Sample pressure | By external overflow vessel (open to atmospheric pressure) |
| Sample quality | Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU |
| Ambient temperature | 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing) |
| Automatic cleaning | Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Relays | 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150) |
| Certifications | CE, ETL certified to UL and CSA safety standards, UKCA |
| Earth connection | Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Part No. | Description | Product description | Parameter | Measuring range | Output |
|---|---|---|---|---|---|
| EZ1031.9800140T | EZ1031sc Phosphate Colorimetric Analyser, Yellow Method, 1 stream, 4x mA Output | EZ1031sc Phosphate Colorimetric Analyser, Yellow Method, 1 stream, 4x mA Output | Phosphate (vanadate yellow) | No Dilution 0.02 - 1 mg/L PO₄-P 0.05 - 2.5 mg/L PO₄-P 0.05 - 5 mg/L PO₄-P 0.1 - 10 mg/L PO₄-P Internal Dilution 0.5 - 50 mg/L PO₄-P 1 - 100 mg/L PO₄-P 2.5 - 250 mg/L PO₄-P 5 - 500 mg/L PO₄-P 7.5 - 750 mg/L PO₄-P 10 - 1000 mg/L PO₄-P | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| EZ1032.9800140T | EZ1032sc Phosphate Colorimetric Analyser, Blue Method, 1 stream, 4x mA Output | EZ1032sc Phosphate Colorimetric Analyser, Blue Method, 1 stream, 4x mA Output | Phosphate (vandate blue) | No Dilution 0.001 - 0.1 mg/L PO₄-P 0.003 - 0.25 mg/L PO₄-P 0.003 - 0.5 mg/L PO₄-P 0.005 - 1 mg/L PO₄-P Internal Dilution 0.025 - 5 mg/L PO₄-P 0.050 - 10 mg/L PO₄-P 0.125 - 25 mg/L PO₄-P 0.250 - 50 mg/L PO₄-P 0.375 - 75 mg/L PO₄-P 0.500 - 100 mg/L PO₄-P | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| EZ2732.980A140T | EZ2732sc Total Phosphorus Colorimetric Analyser, 1 stream, 4x mA Output | EZ2732sc Total Phosphorus Colorimetric Analyser, 1 stream, 4x mA Output | Phosphorus, total | No Dilution 0.005 - 1 mg/L PO 4 (T) Internal Dilution 0.025 - 5 mg/L PO 4 (T) 0.05 - 10 mg/L PO 4 (T) 0.125 - 25 mg/L PO 4 (T) 0.25 - 50 mg/L PO 4 (T) | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
- The Future of Treatment Compliance Made Simple: Everything You Need to Comply with the New Urban Wastewater Treatment Directive (UWWTD)
- The Future of Treatment Compliance Made Simple: Everything You Need to Tackle the New Urban Wastewater Treatment Directive (UWWTD)
- Tender Text Single or multi-stream online Phosphate Analyser
- Nutrient dosing with TOC + RTC-CNP from Hach
- EZ sc Series Phosphate Analysers - EZ1031sc, EZ1032sc and EZ2732sc
Documents open on the Hach website in a new tab.
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ1000sc Series Analysers use colorimetric analysis to measure Phosphate:
- EZ1031sc Vanadate yellow method; standard measuring range: 0.1 - 10 mg/L PO₄-P
- EZ1032sc Molybdate blue method; standard measuring range: 0.005 - 1 mg/L PO₄-P
Options for EZ1000sc analysers include:
- Calibration to 10, 25 or 50% of standard range
- Internal dilution
Options for all analysers include:
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication
Phosphate can also be measured in combination with Total Phosphorus. For this option please check the EZ7800 Series.
Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.
Use the filters in the table below to find your online Phosphate analyser. Need support or a different configuration? Please contact us.
IN THE SAME CATEGORY
Related products
Hach
FILTRAX (eco) Sample Filtration Systems
Filtrax and Filtrax eco Sample Filtration Systems continuously take samples by passing them through ultrafiltration membranes (0.15 µm) immersed in the process effluent, aeration basin or primary settling tank.
Ammonium Analysers
Details →
Hach
NP6000sc Phosphate Analyser
The Hach ® NP6000sc Phosphate Analyser offers dependable and accurate measurement to meet regulatory requirements, maintain process control, and reduce operational costs.
Phosphate Analysers
Details →
Hach
5500 sc Phosphate Analyser
Less Maintenance, Less Downtime. Only two litres of reagent are needed for up to 90 days of analyser operation — twice as long as the 5000 Series.
Phosphate Analysers
Details →