The EZ sc Series Online Analysers offer multiple options to monitor Sulphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
| Weight | Max. 35 kg |
| Flow Rate | 100 - 300 mL/min |
| Analog outputs | Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8 |
| Dimensions (H x W x D) | 740 mm x 500 mm x 340 mm |
| Output | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| Instrument air | Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar |
| Demineralised water | Internal dilution option: Rinse water & Dilution water |
| Digital outputs | Profibus DP or Modbus RTU |
| Verification | Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Accuracy | Better than 2% full scale range for standard test solutions |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Power | 100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA |
| Warranty | 24 aylar |
| Interferences | Other metals that form complexes with EDTA interfere. Silica (SiO₂) ˃ 500 mg/L, organic matter in water. Suspended or colloidal organic matter also can interfere with the endpoint. Large quantities of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere. |
| Calibration | Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced |
| Protection class | IP44 |
| What's in the box | EZ1036sc Sulphate Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 2 x Assembly Container 5L (for Buffer & BaCl₂ Solution) and 1 x Assembly Container 2.5L (for EDTA Solution) |
| Malzeme | Hinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated |
| Number of sample streams | Standard: 1 Optional accessory for 2, 4, or 8 sample streams |
| Sample pressure | By external overflow vessel (open to atmospheric pressure) |
| Sample quality | Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU |
| Sample temperature | 10 - 30 °C |
| Measuring range | No Dilution 5 - 40 mg/L SO₄²⁻ Internal Dilution 25 - 200 mg/L SO₄²⁻ 50 - 400 mg/L SO₄²⁻ 125 - 1000 mg/L SO₄²⁻ 250 - 2000 mg/L SO₄²⁻ 375 - 3000 mg/L SO₄²⁻ 500 - 4000 mg/L SO₄²⁻ |
| Measurement method | Barium chloride precipitation colorimetric method Colorimetric |
| Measurement time | No Dilution Default: 10 min. Continuous: 10 min. Internal Dilution Default: 15 min. Continuous: 13 min. |
| Ambient temperature | 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing) |
| Automatic cleaning | Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Parameter | Sulphate |
| Reagent requirement | Keep between 10 - 30 °C |
| Relays | 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150) |
| Detection limit | No Dilution 5 - 40 mg/L SO₄²⁻: 5 mg/L Internal Dilution 25 - 200 mg/L SO₄²⁻: 25 mg/L 50 - 400 mg/L SO₄²⁻: 50 mg/L 125 - 1000 mg/L SO₄²⁻: 125 mg/L 250 - 2000 mg/L SO₄²⁻: 250 mg/L 375 - 3000 mg/L SO₄²⁻: 375 mg/L 500 - 4000 mg/L SO₄²⁻: 500 mg/L |
| Certifications | CE, ETL certified to UL and CSA safety standards, UKCA |
| Earth connection | Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Part No. | Description | Product description | Parameter | Measuring range | Output |
|---|---|---|---|---|---|
| EZ1036.9800140T | EZ1036sc Sulphate Colorimetric Analyser, 1 stream, 4x mA Output | EZ1036sc Sulphate Colorimetric Analyser, 1 stream, 4x mA Output | Sulphate | No Dilution 5 - 40 mg/L SO₄²⁻ Internal Dilution 25 - 200 mg/L SO₄²⁻ 50 - 400 mg/L SO₄²⁻ 125 - 1000 mg/L SO₄²⁻ 250 - 2000 mg/L SO₄²⁻ 375 - 3000 mg/L SO₄²⁻ 500 - 4000 mg/L SO₄²⁻ | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
Documents open on the Hach website in a new tab.
The EZ sc Series Online Analysers offer multiple options to monitor Sulphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ1036sc Analysers use colorimetric analysis to measure Sulphate:
Standard measuring range: 10 - 40 mg/L
Options for all analysers include:
- Internal dilution
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication
Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.
Need support or a different configuration for your online Sulphate analyser? Please contact us.
Product code: EZ1036.9800140T
IN THE SAME CATEGORY
The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …
For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
