The EZ Series Online Analysers offer an option to monitor Toxicity in wastewater. Toxicity is a non-specific parameter that allows to monitor and protect the microorganisms from toxic influences in the influent.
| Weight | 25 kg |
| Flow Rate | 100 - 300 mL/min |
| Alarm | 1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts |
| Analog outputs | Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option) |
| Dimensions (H x W x D) | 690 mm x 465 mm x 330 mm |
| Instrument air | Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air |
| Demineralised water | N.A. |
| Digital outputs | Optional: Modbus (TCP/IP, RS485) |
| Verification | Automatic; frequency freely programmable |
| Accuracy | Better than 5% full scale range for standard test solutions |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Power | 100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA |
| Warranty | 24 aylar |
| Interferences | N.A. |
| Calibration | Automatic; standard at every analysis cycle |
| Protection class | Analyser cabinet: IP44 / Panel PC: IP65 |
| What's in the box | EZ7900 Toxicity Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and empty Containers for Reagents with Fittings |
| Malzeme | Hinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated |
| Number of sample streams | 1, 2, or 4 |
| Sample pressure | By external overflow vessel |
| Sample quality | Maximum particle size 500 µm, < 0.1 g/L Most applications require the use of a dual EZ9110 + EZ9120 sampling/filtration system. |
| Sample temperature | 10 - 30 °C |
| Measuring range | 0 - 100 % inhibition 0 - 100 % inhibition |
| Measurement method | Respirometry |
| Measurement time | 10 - 15 minutes |
| Ambient temperature | 10 - 30 °C ±4 °C deviation at 5 - 95% relative humidity (non-condensing) |
| Automatic cleaning | Evet |
| Parameter | Toxicity; respiration rate |
| Reagent requirement | Keep between 10 - 30 °C |
| Detection limit | N.A. |
| Certifications | CE compliant / ETL certified |
| Earth connection | Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Part No. | Description | Product description | Parameter | Measuring range | Analog outputs | Digital outputs |
|---|---|---|---|---|---|---|
| EZ7900.XXXXXXXX | EZ7900 Toxicity Analyser | EZ7900 Toxicity Analyser | Toxicity; respiration rate | 0 - 100 % inhibition | Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option) | Optional: Modbus (TCP/IP, RS485) |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
Documents open on the Hach website in a new tab.
The EZ Series Online Analysers offer an option to monitor Toxicity in wastewater. Toxicity is a non-specific parameter that allows to monitor and protect the microorganisms from toxic influences in the influent.
The EZ7900 is a respiration analyser able to detect and measure wastewater streams that present an acute or chronic toxicity to the biomass of a treatment plant. This allows operators to take corrective measures to protect the viability of the wastewater treatment plant. Measurements are carried out on real sludge freshly sampled from the actual treatment plant by means of a dedicated filtration unit.
Most applications require the use of a dual EZ9110 + EZ9120 sampling/filtration system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.
Options:
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication
Need support or a different configuration for your online Toxicity analyser? Please contact us.
Product code: EZ7900.XXXXXXXX
IN THE SAME CATEGORY
The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …
For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
