The ideal online TOC Analyser for precise results even in your most demanding applications. Unique self-cleaning oxidation technology allows the B7000i analyser to easily handle difficult samples and, compared with conventional online…
| Weight | 90 - 120 kg enclosure weight, may vary depending on optional system features |
| Range selection | Automatic or Manual Range Selection |
| Output | 4 - 20 mA |
| Multi-Stream | 1, 2, 4 and 6 streams |
| Languages | Turkish |
| Drenaj | Typical environment (optional systems available for applications with high discharge pressure) |
| EExp / Hazardous Area | Certification options are available for European Standards (ATEX Zone 1, Zone 2), North American Standards (Class I Division 2) and IECEx Zone 1 |
| Display | High-contrast 40 characters x 16 lines backlit LCD with CFL backlight |
| Power requirements (Hz) | 50 Hz |
| Power requirements (Voltage) | 230 V AC |
| Warranty | 12 aylar |
| Power supply | TOC/TIC (230VAC) |
| Communication: digital | Modbus RTU, Modbus TCP/IP & Profibus (when the Profibus option is selected, digital output signals are sent via a Profibus converter using a proprietary communication protocol). Except for Zone 1 certification, Modbus RTU, Modbus TCP/IP and Modbus TCP/IP Redundant are available |
| Permitted chloride range | Up to 30% |
| Number of channels | 1 |
| User Interface | Microcontroller with membrane keypad |
| What's in the box | Contents: B7000i analyser, Tubing, Fuses, Ferrules, Drain, Acid & Base Immersion Tubes, CO₂ Filter & B7000i User Manual |
| Enclosure Rating | IP44; optional IP54 with air purge |
| Nem | 5 - 85% (non-condensing) |
| Sample inlet temperature | 2 - 60 °C |
| Sample volume | En fazla 8.0 mL |
| Oxidation Method | Unique Two-Stage Advanced Oxidation Process using Hydroxyl Radicals |
| Measurement method | Infrared CO 2 measurement after oxidation |
| Measurement time | From 6.5 minutes, depending on range and application |
| Ambient temperature | 5 - 40°C. Air conditioning and heating options available. |
| Parameter | TOC, TIC, TC, VOC, COD and BOD by correlation, TOG (Total Oil and Grease) |
| Particle size | Up to 2 mm, soft particles |
| Detection limit | 0.6 mg/L C |
| Service interval | 6-monthly service intervals |
| Repeatability | ±3% of reading or ±0.3 mg/L C (whichever is greater), with Automatic Range Selection |
| Response time | TOC 6.5 minutes |
| Data Storage | Previous 9999 analysis data on screen in microcontroller memory and data archive storage on SD/MMC card for the lifetime of the analyser. Previous 99 fault data on screen in microcontroller memory and data archive storage on SD/MMC card for the lifetime of the analyser. |
| Part No. | Description | Parameter | Multi-Stream | Measuring range |
|---|---|---|---|---|
| B7BAAA094AABAA2 | Hach BioTector B7000i Online TOC Analyser, 0 - 10.000 mg/L C, 1 channel, 230 V AC | TOC, TIC, TC, VOC, COD and BOD by correlation, TOG (Total Oil and Grease) | 1, 2, 4 and 6 streams | 0 - 10000 mg/L Karbon |
| B7BBAA094AABAA2 | Hach BioTector B7000i Online TOC Analyser, 0 - 20.000 mg/L C, 1 channel, 230 V AC | TOC, TIC, TC, VOC, COD and BOD by correlation, TOG (Total Oil and Grease) | 1, 2, 4 and 6 streams | 0 - 20000 mg/L Karbon |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
Documents open on the Hach website in a new tab.
The ideal online TOC Analyser for precise results even in your most demanding applications
Unique self-cleaning oxidation technology allows the B7000i analyser to easily handle difficult samples and significantly reduces the maintenance schedule and associated costs of conventional online measurement. This TOC analyser eliminates build-up from salts, particles, fats, oils and greases that causes drift and high maintenance requirements.
BioTector analysers help plants optimise processes and reduce product loss with reliable, continuous environmental monitoring and real-time process control.
Effortless TOC thanks to smart design
The B7000i comes with an internal self-cleaning sample line and reactor. As a result, the B7000i delivers reliable results even when your water contains high levels of fat, oil, grease, sludge and particles, or when there are pH fluctuations.
Ease of use
All B7000i analysers come with a unique large-bore tubing that eliminates the need for filtration, so you can be sure of a highly representative sample. The special tubing prevents sample contamination as well as blockages.
Superior reliability
Using BioTector's internationally proven and innovative Two-Stage Advanced Oxidation technology, the B7000i delivers maximum reliability, accuracy and availability with an MCERTS-certified uptime of 99.86%. No calibration or maintenance is required between 6-monthly service intervals.
Flexible application range
The instrument can operate over a wide variety of measuring ranges depending on the application. The B7000i analyser also offers multi-stream capability for up to 6 process streams and can be adapted for both indoor and outdoor use.
Low cost of ownership
Installing a B7000i optimises processes by reducing chemical dosing, waste, sample processing and overall plant operating costs, delivering cost savings.
IN THE SAME CATEGORY
Maximum uptime and reliability for TOC analysis in condensate applications. Using unique technology, requiring scheduled maintenance only every 6 months, offering dual-stream monitoring and being one of the most compact analysers, the Hach…
Maximum uptime and reliability for TOC analysis in drinking water applications. With innovative technology, the Hach BioTector B3500dw requires scheduled maintenance only every 6 months and, with 99.86% uptime, gives you full confidence in your TOC measurements…
Highest reliability and low cost of ownership combined in TOC analysis for water control. The Hach BioTector B3500e delivers accurate online TOC analysis with its unique, market-leading self-cleaning technology.
Simplified effluent TOC monitoring. With reagent changes only twice a year and seamless integration with the Hach sample homogenisation unit, the B3500s is the easiest solution for regulatory-compliant TOC monitoring of municipal wastewater.
