The SURFACE SCATTER 7 sc High Range Turbidimeter delivers superior performance over a range of 0 - 9999 NTU. The SURFACE SCATTER 7 sc Turbidimeter (SS7) is the original non-contact turbidimeter.
| Weight | 15.9 kg |
| Flow Rate | Required sample flow rate is 1.0 - 2.0 L/min |
| Alarm | Relays programmable via the SC controller for warning, alarm, feeder, event, pulse width modulation and frequency control. |
| Relative humidity | 5 - 95% non-condensing |
| Channels | Instrument Only |
| Resolution | <1000 NTU: 0.01 NTU 1000 - 9999.9 NTU: 0.1 NTU |
| Accuracy | ±5% of reading or ±0.1 NTU (whichever is greater) from 0 - 2000 NTU ± 10% of reading from 2000 - 9999 NTU |
| Power requirements (Voltage) | 100/230 V AC |
| Warranty | 24 aylar |
| Number of channels | None |
| Controller | No |
| Controller compatibility | SC4500, SC1000, SC200 |
| Installation category | Category II |
| Mounting | Wall mount |
| Enclosure Rating | NEMA 12 |
| Enclosure Construction | Plastic instrument enclosure |
| Sample outlet | 1 inch female NPT thread |
| Sample inlet | 0.75 inch female NPT thread |
| Sample temperature | 0 - 50 °C |
| Measuring range | 0,1 - 9999 NTU |
| Ambient temperature | 0 - 50°C |
| Storage conditions | -20 - 80 °C |
| Repeatability | 1.0% or ±0.04 NTU, whichever is greater |
| Response time | Initial response time is 45 seconds |
| Part No. | Description | Product description | Sample temperature | Power requirements (Voltage) |
|---|---|---|---|---|
| LPV431.99.00002 | Surface Scatter 7 sc High range turbidimeter | Surface Scatter 7 sc High range turbidimeter | 0 - 50 °C | 100/230 V AC |
Request a quote for pricing and lead time; you can mention the part number you are interested in your message.
Documents open on the Hach website in a new tab.
The SURFACE SCATTER 7 sc High Range Turbidimeter delivers superior performance over a range of 0 - 9999 NTU. The SURFACE SCATTER 7 sc Turbidimeter (SS7) is the original non-contact turbidimeter. Its design minimises the loss of sensitivity caused by high-turbidity samples and eliminates the need to clean and replace sample cells for liquids with high suspended solids loads. For longer service life, all wetted parts of the instrument are made of corrosion-resistant materials. The photodetector and light source assemblies are protected from the effects of corrosive vapours and heated samples.
Product code: LPV431.99.00002
IN THE SAME CATEGORY
With a unique optical design that sees much more of your sample than any other turbidimeter, the EPA-approved TU5 Series platform delivers the best accuracy and sensitivity at low levels while minimising measurement-to-measurement variability…
