Hach · EZ1008.9800140T

EZ Series Colour Analysers

The EZ sc Series Online Analysers offer an option to monitor Colour (Platinum-Cobalt Scale) in drinking water. The EZ1008sc Analysers use colorimetric analysis to measure Colour.

AğırlıkMax. 35 kg
Akış Hızı100 - 300 mL/min
Analog çıkışlarActive 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8
Boyut (Y x G x D)688 mm x 460 mm x 340 mm
ÇıkışOptional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
Cihaz havasıDry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Demineralize suNone
Dijital çıkışlarProfibus DP or Modbus RTU
DoğrulamaAutomatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
DoğrulukBetter than 3% of full scale for 1 - 50 mg/L Pt-Co; better than 2% of full scale for all other measuring ranges.
DrenajAtmospheric pressure, vented, min. Ø 32 mm
Enerji100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA
Garanti24 aylar
GirişimlerLarge quantities of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere.
KalibrasyonAutomatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Koruma sınıfıIP44
KutudakilerEZ1008sc Colour Analyser, Instruction Manual, 1 x Double Bit Door Key and 1 x Mounting Brackets
MalzemeHinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated
Numune akışı sayısıStandard: 1 Optional accessory for 2, 4, or 8 sample streams
Numune basıncıBy external overflow vessel (open to atmospheric pressure)
Numune kalitesiMaximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Numune sıcaklığı10 - 30 °C
Ölçüm aralığıNo Dilution 1 - 50 mg/L Pt-Co 1 - 125 mg/L Pt-Co 2.5 - 250 mg/L Pt-Co 5 - 500 mg/L Pt-Co
Ölçüm metoduColorimetric
Colorimetric measurement at 465 nm, conform with standard method ASTM 2120 B
Ölçüm süresiDefault: 10 min. Continous: 4 min.
Ortam sıcaklığı10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Otomatik temizlemeYes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
ParametreColor
Reaktif gereksinimiKeep between 10 - 30 °C
Röleler5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Saptama limiti1 - 50 mg/L Pt-Co: 1 mg/L 1 - 125 mg/L Pt-Co: 1 mg/L 2.5 - 250 mg/L Pt-Co 2.5 mg/L 5 - 500 mg/L Pt-Co: 5 mg/L
SertifikalarCE, ETL certified to UL and CSA safety standards, UKCA
Soğutma suyuFlow rate approx. 5 L/h; temperature max. 30 °C; pressure max. 0.5 bar
Toprak bağlantısıDry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Ürün kodu: EZ1008.9800140T

İlgili ürünler

EZ Series Ammonium Analysers
Hach

EZ Series Ammonium Analysers

The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …

Amonyum Analizörleri Detay →
EZ Series Fluoride Analysers
Hach

EZ Series Fluoride Analysers

For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…

Florür Analizörleri Detay →
EZ Series Phosphate Analysers
Hach

EZ Series Phosphate Analysers

The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.

Fosfat Analizörleri Detay →
EZ Series Silica Analysers
Hach

EZ Series Silica Analysers

The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.

EZ1035.9800140T Detay →