The EZ sc Series Online Analysers offer multiple options to monitor Iron in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
| Ağırlık | Max. 35 kg |
| Akış Hızı | 100 - 300 mL/min |
| Analog çıkışlar | Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8 |
| Boyut (Y x G x D) | 688 mm x 460 mm x 340 mm |
| Çıkış | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| Cihaz havası | Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar |
| Demineralize su | Internal dilution option: Rinse water & Dilution water |
| Dijital çıkışlar | Profibus DP or Modbus RTU |
| Doğrulama | Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Doğruluk | Better than 2% full scale range for standard test solutions |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Garanti | 24 aylar |
| Kalibrasyon | Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced |
| Koruma sınıfı | IP44 |
| Malzeme | Hinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated |
| Numune akışı sayısı | Standard: 1 Optional accessory for 2, 4, or 8 sample streams |
| Numune basıncı | By external overflow vessel (open to atmospheric pressure) |
| Numune kalitesi | Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU |
| Ortam sıcaklığı | 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing) |
| Otomatik temizleme | Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly |
| Reaktif gereksinimi | Keep between 10 - 30 °C |
| Röleler | 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150) |
| Sertifikalar | CE, ETL certified to UL and CSA safety standards, UKCA |
| Toprak bağlantısı | Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Parça No | Tanım | Ürün açıklaması | Parametre | Ölçüm aralığı | Çıkış |
|---|---|---|---|---|---|
| EZ1024.9800140T | EZ1024sc Iron Colorimetric Analyser, 1 stream, 4x mA Output | EZ1024sc Iron Colorimetric Analyser, 1 stream, 4x mA Output | Iron Fe(II+III), total dissolved | No Dilution 0.005 - 0.25 mg/L Fe 0.005 - 0.5 mg/L Fe 0.01 - 1 mg/L Fe Internal Dilution 0.05 - 5 mg/L Fe 0.1 - 10 mg/L Fe 0.25 - 25 mg/L Fe 0.5 - 50 mg/L Fe 0.75 - 75 mg/L Fe 1 - 100 mg/L Fe | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| EZ2724.980B140T | EZ2724sc Total Iron Colorimetric Analyser, 1 stream, 4x mA Output | EZ2724sc Total Iron Colorimetric Analyser, 1 stream, 4x mA Output | Iron, total | No Dilution 0.005 - 0.25 mg/L Fe(T) 0.005 - 0.5 mg/L Fe(T) 0.01 - 1 mg/L Fe(T) Internal Dilution 0.05 - 5 mg/L Fe(T) 0.1 - 10 mg/L Fe(T) 0.25 - 25 mg/L Fe(T) | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
Fiyat ve teslim süresi için teklif isteyin; ilgilendiğiniz parça numarasını mesajınızda belirtebilirsiniz.
Dokümanlar Hach sitesinde yeni sekmede açılır.
The EZ sc Series Online Analysers offer multiple options to monitor Iron in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ1000sc and EZ2000sc Series Analysers use colorimetric analysis to measure Iron:
- EZ1024sc Iron Fe(II+III), total dissolved
- EZ2724sc Iron, total
Standard measuring range: 0.01-1 mg/L
Options for all analysers include:
- Calibration to 25 or 50% of standard range
- Internal dilution
- Multiple stream analysis (1-8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication
Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.
Use the filters in the table below to find your online Iron analyser. Need support or a different configuration? Please contact us.
AYNI KATEGORİDE
The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …
For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
