The EZ Series and EZ sc Online Analysers offer multiple options to monitor Sulphide in water. Typical applications are wastewater, drinking water, surface water.
| Akış Hızı | 100 - 300 mL/min |
| Doğruluk | Better than 2% full scale range for standard test solutions |
| Drenaj | Atmospheric pressure, vented, min. Ø 32 mm |
| Enerji | 100 - 240 VAC, 50/60 Hz Max. power consumption: 120 VA |
| Garanti | 24 aylar |
| Malzeme | Hinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated |
| Numune kalitesi | Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU |
| Numune sıcaklığı | 10 - 30 °C |
| Parametre | Sulphide |
| Reaktif gereksinimi | Keep between 10 - 30 °C |
| Toprak bağlantısı | Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm² |
| Parça No | Tanım | Ürün açıklaması | Parametre | Ölçüm aralığı | Çıkış |
|---|---|---|---|---|---|
| EZ1037.9800140T | EZ1037sc Sulphide Colorimetric Analyser, 1 stream, 4x mA Output | EZ1037sc Sulphide Colorimetric Analyser, 1 stream, 4x mA Output | Sulphide | No Dilution 0.025 - 0.5 mg/L S²⁻ Internal Dilution 0.125 - 2.5 mg/L S²⁻ 0.25 - 5 mg/L S²⁻ 0.625 - 12.5 mg/L S²⁻ 1.25 - 25 mg/L S²⁻ 1.875 - 37.5 mg/L S²⁻ 2.5 - 50 mg/L S²⁻ | Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP |
| EZ4032.XXXXXXXX | EZ4032 Sulphide Analyser | EZ4032 Sulphide Analyser | Sulphide | 20 - 1000 mg/L S 2- Optional: 2 - 100 mg/L 5 - 250 mg/L 10 - 500 mg/L Internal dispenser dilution (max. factor 100) |
Fiyat ve teslim süresi için teklif isteyin; ilgilendiğiniz parça numarasını mesajınızda belirtebilirsiniz.
Dokümanlar Hach sitesinde yeni sekmede açılır.
The EZ Series and EZ sc Online Analysers offer multiple options to monitor Sulphide in water. Typical applications are wastewater, drinking water, surface water.
The EZ1000sc Series Analysers use colorimetric analysis:
- EZ1037sc; standard measuring range: 50 - 500 µg/L
The EZ4000 Series Sulphide Analysers are single-parameter titrators:
- EZ4032 Sulphide; standard measuring range: 20 - 1000 mg/L
Measuring range options:
- EZ1037sc: Internal dilution
- EZ40xx: Calibration to 10%, 25% or 50% of standard range
Options for all analysers include:
- Multiple stream analysis (1, 2, 4 or 8 streams) reducing cost per sampling point
- Analogue and/or digital outputs for communication
Some applications may require the use of a sampling/filtration or an external dilution system for sample preconditioning. For this option please check the EZ9000 Sample Preconditioning page.
Use the filters in the table below to find your online Sulphide analyser. Need support or a different configuration? Please contact us.
AYNI KATEGORİDE
The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …
For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…
The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.
The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.
