Hach · EZ7050.XXXXXXXX

EZ Series COD Analysers

The EZ Series Online Analysers offer multiple options to monitor Chemical Oxygen Demand (COD) in water. Typical applications are wastewater and surface water. The EZ7000 Series COD Analysers are single-parameter titrators.

Ağırlık25 kg
Akış Hızı100 - 300 mL/min
Alarm1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts
Analog çıkışlarActive 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)
Boyut (Y x G x D)690 mm x 465 mm x 330 mm
Cihaz havasıDry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air
Demineralize suFor rinsing
Dijital çıkışlarOptional: Modbus (TCP/IP, RS485)
DoğrulamaAutomatic; frequency freely programmable
DoğrulukBetter than 5% full scale range for standard test solutions
DrenajAtmospheric pressure, vented, min. Ø 32 mm
Enerji230 VAC, 50/60 Hz 120 VAC, 50/60 Hz Max. power consumption: 440 VA
Garanti24 aylar
GirişimlerChloride > 1 g/L, inorganic reducing agents such as nitrites, sulphides and iron(II) will increase the result, aromatic hydrocarbons and pyridine are not oxidized to any appreciable extent. Some very volatile organic substances may escape the oxidation by evaporation. Straight chain aliphatic compounds are effectively oxidised by the silver sulphate/sulphuric acid solution. Fats, oil, proteins, surfactants and tar.
KalibrasyonAutomatic, 2-point; frequency freely programmable
Koruma sınıfıAnalyser cabinet: IP55 / Panel PC: IP65
KutudakilerEZ7050 COD Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x Combined Pt Electrode, Routine S7 Connection, 1 x empty 2.5L Reagent Container with Fittings (AgNO₃ Solution), 2 x empty 10L Reagent Containers with Fittings (Acid & Oxalate Solution) and 1 x empty 10L Reagent Dark Container with Fittings (KMNO₄ Solution)
MalzemeHinged part: Thermoform ABS, door: PMMA Wall section: Galvanised steel, powder coated
Numune akışı sayısı1, 2, 4, or 8
Numune basıncıBy external overflow vessel
Numune kalitesiMaximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Numune sıcaklığı10 - 30 °C
Ölçüm aralığı1 - 20 mg/L O 2
1 - 20 mg/L O₂
Ölçüm metoduRedox titration after oxidation by acid-potassium dichromate solution, conform with ISO 6060 method Or redox titration after oxidation by potassium permanganate solution, conform with ISO 8467 and JIS K0806 methods
Ölçüm süresi40 minutes, including oxidation time of 30 minutes. Remark: standard method for Cr destruction requires 120 minutes.
Ortam sıcaklığı10 - 30 °C ±4 °C deviation at 5 - 95% relative humidity (non-condensing)
ParametreCOD
Reaktif gereksinimiKeep between 10 - 30 °C
Saptama limiti≤ 1 mg/L
SertifikalarCE compliant / UL certified
Soğutma suyuFlow rate approx. 5 L/h; temperature max. 30 °C; pressure max. 0.5 bar
Toprak bağlantısıDry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Ürün kodu: EZ7050.XXXXXXXX

İlgili ürünler

EZ Series Ammonium Analysers
Hach

EZ Series Ammonium Analysers

The Hach EZ Series Ammonium Analysers provide reliable, continuous online monitoring of ammonium and ammonia (NH₄/NH₃) across a wide range of water and wastewater applications, including municipal wastewater treatment, drinking water, …

Amonyum Analizörleri Detay →
EZ Series Fluoride Analysers
Hach

EZ Series Fluoride Analysers

For drinking water, fluoridation systems, and industrial wastewater treatment, Industrial Fluoride Removal Process, the Hach EZ Series Fluoride Analysers provide reliable, continuous fluoride measurement using proven Ion Selective…

Florür Analizörleri Detay →
EZ Series Phosphate Analysers
Hach

EZ Series Phosphate Analysers

The EZ sc Series Online Analysers offer multiple options to monitor Phosphate in water. Typical applications are wastewater, drinking water, steam & power generation, surface water.

Fosfat Analizörleri Detay →
EZ Series Silica Analysers
Hach

EZ Series Silica Analysers

The EZ sc Series Online Analysers offer multiple options to monitor Silica in water. Typical applications are steam & power generation, surface water, process water. The EZ1000sc Series Analysers use colorimetric analysis to measure Silica.

EZ1035.9800140T Detay →